Error in the Windows ExplorerImpossible to find the desktopError in the video driverError in the sound driverError in the sound driver (DirectX/WDM)The sound card is already used by another applicationError in the sound card driver: not enough memoryError in the sound driver of CoreAudioThe database on drive %c: is corrupted.\nGo to Config/Browser and click Fix to fix the %c: database.Invalid skin file (error line %i in the xml)Impossible to init the WDM sound driver. Please check that you have a proper WDM (and not VxD) driver installed, with quad-output functions\n(Please note that Win95 and Win98osr1 do not support WDM drivers)The music is still playing!\nAre you sure you want to quit VirtualDJ?A song is playing on this deck.\nAre you sure you want to stop it?This is only a trial version of VirtualDJ.\nPlease visit our website http://www.virtualdj.com/ to order the full versionProtection error %i. Please contact us on http://www.virtualdj.com/contact/Invalid serial numberThe CD is unreadable.\nMaybe you should try to clean it.The controller has not been detected.\nPlease plug in the controller and start VirtualDJ again.ビデオドライバー エラーASIOサウンドドライバー エラーError in the ASIO sound driver: Not enough channelsNo timecode signal found.\nPlease play a timecoded vinyl on the turntable and try again.\nIf it's still not working, check your cables, and the volumes of your soundcard.Invalid version of DirectX.\nPlease install at least DirectX v9.0c.\nYou can download it for free from Microsoft website:\nhttp://www.microsoft.com/directxThe timecode support is a feature only available in the 'Professional' version of VirtualDJ.\nThe 'DJConsole Edition' version provided with your DJConsole will only let you test it for 5 minutes.\n\nIf you want to upgrade to the Pro version, please visit our website:\nhttp://www.virtualdj.com/Sorry, full-screen video support is only available in the professional version of VirtualDJ.\n\nIf you want to upgrade to the Pro version, please visit our website:\nhttp://www.virtualdj.com/One of the file you are currently playing is protected with a DRM protection.\nThus, it is forbidden to record or burn it.Warning!\nThe skin you are trying to use has a higher resolution than your screenThis shortcut is already assigned.\n\nClick Yes to add the new shortcut and build up macros.\nClick No to replace the previous shortcut.The drive %c: is full.Warning!\nThe system was unresponsive (%s).\nVirtualDJ has performed a recovery, and should now work ok again.\nStill, you might want to restart the software next time it's convenient enough for you to do so.NetSearch is a feature available to VirtualDJ Members.\nPlease visit http://www.virtualdj.com/ for more information.You need to log into your VirtualDJ.com account to use this feature.\nPlease go to Config/Network and provide your login and password.This cache file has expired. Please connect to the Internet to revalidate it.The date on your computer is incorrectly set. Please fix it before using NetSearchInternet connection is unavailable. Please connect to the Internet to use this feature.検索: (Empty)Please select an encoder plugin to record in mp3.\n\nIf you need help with this feature, please visit our website.Welcome in Virtual-Scratch.\nYou will need a webcam or a video camera to use this feature.\nOnce the camera is plugged, pass your hand over the red line to scratch.Welcome in Vinyl-Control.\nYou will need a webcam or a video camera to use this feature.\nPlace the camera to see the center of your vinyl, then let your turntable turn at 45RPM and press CALIBRATE.\nOnce calibrated, use your vinyl as usual, and VirtualDJ will follow.Sound CardsDrag a song on this deck to load itFade Entry PointFade Exit PointCut Entry PointCut Exit PointTempo Entry PointTempo Exit PointAutoMix PointFirst AnchorLast AnchorVirtualDJ will now try to connect to the internet and check if a new version is available.\n\nYou can disable this behavior in the CONFIG menu at any time.Number of matches foundSuggestion from your MusicGroups feedThis file already exists.\nDo you want to overwrite?You can't delete a file that is actually playingIf you want to listen to a song into your headphones, press and hold the button with the headphone logo on your DJConsole%ih agoYour v4.x database has been succesfully converted.\nAll %i entries have been imported and matched.Your v4.x database has been converted.\n%i entries have been imported.\n%i have been matched, but %i were not in your local database.\nThese entries will be matched to your actual files as you browse them.\nIf you want to speed up the matching process, you can manually select "add to search DB" on the relevant folders.RECORD AUDIOBURN CDBROADCASTRECORD VIDEOInitializing tag engine...Loading database...Loading iTunes database...Loading mappers...Initializing network engine...Initializing plugin engine...Initializing sound engine...Loading skin...Initializing graphic engine...Loading plugins...Initializing action engine...Initializing external devices...Finalizing initialisation...Are you sure you want to revert this mapper to factory settings?There are no default settings for this device. Do you want to erase it anyway?IconタイトルｱｰﾃｨｽﾄアルバムジャンルBpmKey長さビットレート年コメントPlay countFirst seenFirst playLast playDriveフルパスファイル名FiletypeサイズFiledateLinkedVideoKey(Numeric)作曲Bpm DiffKey Diffタイトルｱｰﾃｨｽﾄフルパスファイル名コメントアルバムジャンル年BpmKeyLinkedVideo作曲WavFile (*.wav)\0*.wav\0MP3 File (*.mp3)\0*.mp3\0Plugins (*.dll)\0*.dll\0Wave File (*.wav)\0*.wav\0MP3 File (*.mp3)\0*.mp3\0CD Burn File (*.cue/*.bin)\0*.bin;*.cue\0XML File (*.xml)\0*.xml\0All Samples\0*.wav;*.mp3;*.wma;*.asf;*.cda;*.ogg;*.vdj\0VDJ Samples\0*.vdj\0VDJ Loops (*.vdj)\0*.vdj\0Video File (*.avi)\0*.avi\0Video File (*.mov)\0*.mov\0Record FileSelect where to copy this fileSelect where to move this fileRecord PluginDestination FileLoad shortcuts listSave shortcuts listLoad SampleSave SampleYesNoEdit BPMOKCancelCommentOKSerial NumberWelcome to VirtualDJ\n\nPlease enter the Serial Number provided with your product.OKShortcutOKCancelValue=ResetAutoMomentarilyFilenameOKCue NameOKCrash GuardRecoverShutdownA fatal error has occurred !\nVirtualDJ can try to automatically recover from the crash.\n\nJust click on "Recover" and everything should be fine.Send reportVirtual-ScratchActiveWebCamDeviceSource...Format...HelpVinyl-ControlActiveWebCamDeviceSource...Format...CalibrateHelpSettingsOKCancel設定の適用Adjust BPM ValuesOKCancelビート設定始点Set Beat終点Set Beat区間ビート数beatsManual\nBeat TapBPM設定Bpm位置他デッキから\nBPMをコピーBPM再分析AutoMix設定フェードインカットインビートシンクSet Entry\nPointSet Exit\nPoint許可FilterOKCancelName:Filter:Syntax error: %sExamples of common filters:\n- top 20 nbplay\n- days since lastplay<31\n- bpmdiff<=2 and keydiff=0\n- isscanned=0\n- top 20 nbplay and hascover=1 and (type=video or type=karaoke)\n- year>=1980 and year<1990\n- filepath starts with "c:\mp3\80s" or filepath starts with "d:\musics\eighties"Zipcode or AddressGo...プレビューファイル情報タグ情報より読込みタグ情報より読込みタグ再読込みタグ情報より読込みcommentを消すBPMBPM再解析BPMマニュアル登録File operations名前変更削除移動コピーCreate Sub-Folderエクスプローラーを開くConvert to WAV/MP3RemoveSearch DBデータベースに追加データベースから除くClean search DBRemove played flagGo to folderRemove video linkアルバムカバーダウンロードScan for BPMsScan for TagsRecurseお気に入りに登録お気に入りから削除virtual folderに登録上に移動下に移動Change Filterプレイリストの読込みMerge to Playlist読込み...保存...AutomixスタートAutomixストップAutomixタイプNone (back-to-back)SmartSmart (will be: %s)Fade (remove intro/outro)Fade (remove silence)Fade (remove nothing)mixタイム0秒1秒2秒4秒8秒16秒RepeatClearShuffleRemove playedRemove duplicates保存Loopピッチ合わせビートロックシンクロ ON4ビート1ビートハーフビート1/4ビートオートプレイ書込み保護Abort DownloadダウンロードBuy繰り返しOrder...アルバムカバー表示音楽ファイルビデオファイルKaraokeファイルフォルダー内検索デバイス内検索NetSearch AudioNetSearch VideoOnly NetSearch when no local resultsRefresh cache authorizationsDownload to cacheCancel download to cache接続機器のみ表示新しいデバイスを再読込みSwitch the devicesキーボードショートカット使用MIDI機器使用HID機器使用Serial機器使用再読込みサウンド環境設定VDJスキン選択MIDI設定オプションインターネットコーデックパフォーマンス設定Multi-Instanceブラウザー設定インフォAdvanced Optionsセキュリティポップアップ表示設定MSNMax Loadプレイリストのオートロード設定非再生ファイルの自動保存スクロール回転数ピッチレンジオートアップデートオートピッチ合わせオートゲイン曲ロード時のピッチリセット設定曲ロード時のEQリセット設定オートキュー設定オートヘッドフォン切替設定AutoMIX時クロスフェーダレンジ設定クロスフェーダー設定Disengage BeatLockSmart BeatTapAllow BPM<80Fast Skin ResizeJog ModeJog Sensitivity (Scratch)Jog Sensitivity (Cue)Jog Sensitivity (Bend)Jogwheel ScratchヘッドフォンEQ設定曲ロード時のFX設定有効無効無し確認するAlwaysLimited
<_5mn>5mn
<_10mn>10mn
<_15mn>15mn
<_30mn>30mn
OtherInvertedノーマル33rpm45rpm
<_6to6>-6% to +6%
<_8to8>-8% to +8%
<_10to10>-10% to +10%
<_12to12>-12% to +12%
<_15to15>-15% to +15%
<_20to20>-20% to +20%
<_25to25>-25% to +25%
<_33to33>-33% to +33%
<_50to50>-50% to +50%
<_100to100>-100% to +100%
SmoothFullCutUserScratchManualon Loadon SwitchAuto+RememberRememberAutoSmartCDVinylVinyl/CDCD/Vinylインプット :アウトプット :サウンドカード :Timecode\nConfig...ASIO設定...Ultra-latency ASIOChan 1&2Chan 3&4Chan 5&6Chan 1Chan 2Input 1Input 2Output 1Output 2Output 3左チャンネル右チャンネル１番目のサウンドカード２番目のサウンドカードフロント出力リア出力センター出力マスターヘッドフォン左デッキ右デッキサンプル/プレビューPhonoレベルLine レベル設定の適用ブラウザー設定マイコンピュータを表示デスクトップを表示NetSearchを表示ジャンル別の表示プレイ記録を表示iTunesフォルダの表示Cratesを表示（ScratchLIVEデーターベース互換）プレイリストを表示お気に入りを表示VirtualFoldersの表示FilterFoldersの表示Infos GatheringID3のTagsを読み込むID3のArtist/Titleを読み込むID3のCommentsを読み込むCoverSearch DatabaseDon't searchLocal search onlyDownload exact matchDownload no matter whatAdd manuallyAdd automaticallyDatabaseDrive:CheckCleanFixアップデートのチェックプラグインのダウンロード設定を初期化\n押すときは注意して！No synchronizationLocal synchronization (multi-instance)Network synchronizationAddress :Port :Use NetSearchUse MusicGroupsDisable MusicGroups for this session onlyVirtualDJ.com ログインID :VirtualDJ.com パスワード :ログインビデオ出力オプションアクティブTV出力設定ビデオカードを使用するビデオクロスフェーダーを自動化（推奨？）ビデオクロスフェーダーとオーディオクロスフェーダーをリンクDecode while hiddenビデオファイルロード時にアクティブLink video when dropped on preview windowvirtual DJのロゴを隠すボリュームフェーダーと映像のフェードをリンク比率（トリミング）保持全画面表示音声のみのファイルにこのプラグインを使用します：簡易設定低能力ＰＣ高性能ＰＣSound Card遅延時間 :Safe ModeOverclock48kHz <-> 44kHzBasic InterpolationLowpass FilterFilter Taps :Filter SmoothScratchOptimize for :QualityLatencyシンプルアルゴリズム拡張アルゴリズムFilter Size :マスターテンポFastAdvancedComplexity :Spatialization :Welcome to VirtualDJ LE.\n\nVirtualDJ LE is the perfect software companion to your new controller.\nIts features have been tailored to fit your controller and give you the most enjoyable mixing experience.\n\nIf you need more advanced features, VirtualDJ LE also let you test for free the features of the VirtualDJ PRO software.\nYou can activate VirtualDJ PRO's features for a period of 20 days. After these 20 days, the features available will be those of VirtualDJ LE again.Try\n20-days\nPRO versionUpgrade to\nPRO version20-days trial not used yetPRO version for %i days20-days trial already usedYou can now use all the features from VirtualDJ PRO.\nPlease restart VirtualDJ to access all the new features.\nAt the end of this period, your software will automatically revert to the Limited Edition featuresVinyl :Mode :Smart relativeAbsoluteRelativeLeft / Right :Phase / Anti :ゲイン :無音 :Debug...両方左デッキ右デッキInvert Signal StereoInvert Signal PhaseApply RIAA phono filterApply noise LP filterAdjust for 45 RPMDisable PitchDisable ClearSoundDisable AntiSkipPitch sensibilitySmoothLead time :Save capture...Select if you will use timecode inputs and how manySelect how many and what channels VirtualDJ should outputSelect which soundcard(s) VirtualDJ should use (the list will show the available soundcard for the input/output configuration you selected)Click here to calibrate your timecode vinylsSelect which input comes from which lineSelect which output goes to which lineSelect the primary soundcardSelect the second soundcardSelect the ASIO driver to useIf selected, the Hercules soundcard will be used in ASIO mode, and when bypass is used, the input will be processed by VirtualDJ to apply equalizationIf selected, the inputs of the DJConsole soundcard will be used, and when bypass is used, the input will be processed by VirtualDJ to apply equalizationSelect this to use the SL1 card with a turntableSelect this to use the SL1 card with a CD playerIn ASIO Ultra-Latency mode, the latency will be even smaller, but not every ASIO driver can cope with itClick here to apply the modifications you madeSelect a new graphical interface (you can download additional skins from http://www.virtualdj.com/)Change the default language (you can download additional languages from http://www.virtualdj.com/)Mappers options...Select a controllerRevert the mapper to factory settingsDelete this keyAdd a new keySelect Key-Learn then use the key/button/slider on your keyboard/controller to get its nameSelect a keySelect Action-Learn then click an element on the interface (skin) to get its actionEnter an action for this key, in VDJscript languageLearn more about VDJscript (Internet connection required)Add a new extensionDelete the selected extensionList of known extensions (double-click to modify)the Volumes folder lists all the drives connectedthe Desktop folder has the content of your deckstopthe NetSearch folder holds the files cached from NetSearch, and let you use NetSearch when you removed it from your regular search optionsthe Genre folder sort all your songs by genre, according to their ID3 tagthe History folder has all your past tracklisting, sorted by datethe iTunes folder has all your iTunes playliststhe Crates folder has all your SSL cratesthe Playlist folder has all your saved playliststhe Favorite folders are the folder you selected as "monitored" foldersthe Virtual folders are the "unmonitored" folders you createdthe Filter folders are the "automatic" folders you createdCheck which songs from your database are not present on your computer anymore, and remove them from the search resultsClean from your database all songs that are not present on your computer anymoreFix your database if it has been corrupted, and recompress itlet VirtualDJ automatically load and use the ID3 tags of the songs it encountersget the artist/title information from the ID3 tags or from the filenameget the comments from the ID3 tagsAutomatically search the Internet for cover artwork if not available locallyAutomatically add every encountered song to the search database when you browse through foldersNetSearch is a feature that let VirtualDJ automatically search various sources on the Internet for music and videos, and let you stream them directly on your decks.\nYou need to be a VirtualDJ Member in order to use NetSearch.MusicGroups is a feature that let you share your playlist with other users on VirtualDJ.com, and/or benefit from their playlists to get live advices on your music selection.\nYou need to be a VirtualDJ Member in order to use MusicGroups.Don't send your playlist during this session. This setting will be reseted next time you start VirtualDJ.Enter your VirtualDJ.com login. Go to www.virtualdj.com to create one if you don't already have.Enter your VirtualDJ.com password. Leave it blank and click "log in" if you want to stop the automatic reconnection.Send your login/password to VirtualDJ.com. Please note that you only need to do this once. Once successfully connected, VirtualDJ will automatically reconnect in the future.Disable or enable the video engineOpen or close the video window.In order to use TV output, you must put your videocard in "Dual Display". The second display should then appears here.If something goes wrong with your videocard, try to disable this (but most effects and transitions won't work then)Let VirtualDJ moves the video crossfader automatically according to your mixingLink the video crossfader to the audio crossfaderDecode the video streams even when the video is hidden (faster transitions, but uses more CPU)Automatically activate the video window if you load a video fileRemove the VirtualDJ logo from the video output (and get bad karma)When activated, if you drop a video file on the preview window, its video track will replace the video track of the actual file. If the actual file is audio-only, it will use this video track from now on.Fade the video channel to black when you use the volume slidersKeep the videos in 16/9 or 4/3 no matter what the screen resolution is, by cropping the videos on the sidesKeep the videos in 16/9 or 4/3 no matter what the screen resolution is, by adding black bars on the sidesUse this plugin when the video window is open and there is no video, or the track playing is audio-onlySelect a pre-made set of performance settings. Don't put a higher quality unless you know what you are doing!Change the latency used by the soundcard. If you are not using timecodes, we recommend leaving this to auto.Safe mode lets VirtualDJ pre-compute a few seconds of the song in advance and send it to the soundcard buffer. It will prevent audio glitches if your computer suddenly starts a lengthy kernel operation, like waking up your harddrive. On the other hand, it requires more CPU every times you change the pitch, volume, scratch, or do any action. Don't use safe mode if you use advanced master tempo. (safe mode has no effect on ASIO soundcards)Optimize the internal clock (useful only for old laptops)Convert from different rates using a basic interpolation algorithmConvert from different rates using filtersOptimize the scratching algorithm for the best sound qualityOptimize the scratching algorithm for the best latencyCompute the scratch sounds using a simple and fast algorithmCompute the scratch sounds using an enhanced more realistic algorithmDefines the complexity of the filters used in the algorithmUses a smoother algorithm but uses a little more CPUUse the normal Master Tempo algorithmUse an advanced algorithm for Master Tempo. The sound will be better at extreme pitch changes, but this algorithm uses much more CPUDefines the complexity of the algorithm for advanced master tempoDefines the complexity of the algorithm for advanced master tempoSelect what kind of timecode control record you will be using. For best performance, we recommend Serato vinyl or VirtualDJ v5 vinyl.Use this knob if the graphic shows an "egg" instead of a pure circleUse this knob if the graphic shows a tilted egg instead of a pure circleUse this knob if the graphic is too small or too big for the windowUse this knob to adjust the gray zone on the graphic, so that it doesn't touch the green circle while in normal operation, but completely covers the green lines when you stop the turntableSelect what timecode mode you want to use. In doubt, use "Smart Relative", which is the default and should be used unless you have specific needsIf you have problems getting 100% timecode quality, use these tools to try to adjust your timecode signalInvert the left and right of the incoming signal (if you inverted the red and white cables from your turntable). use this if your song is playing backward.Invert the phase of the incoming signal (if your needle has its internal wires inverted). use this if your song is playing backward.Apply a software RIAA filter. use this if you are plugging a turntable (with no "line-output" switch) into a regular soundcard that doesn't have a phono pream (no "phono" switch).Use this if the graphic is blurry, or if the dots are dispersed instead of forming a continuous circular lineUse this if your turntable turns at 45RPM instead of 33RPM.If you disable SmartPitch, the pitch slider inside VirtualDJ will not move to reflect the pitch on your turntable, and the BPM of your song will not reflect the pitch change neither.ClearSound uses a technology that gives a better sound when you don't scratch, at the expense of a very small delay when you scratchAntiSkip uses a technology that will ensure that VirtualDJ will not skip even if your needle skips on your record.The Pitch Sensibility is used to adjust how much the pitch slider in VirtualDJ should follow the turntable speed. If set too low, the pitch slider will take some time to adjust. If set too high, the pitch slider will move when you just want to scratch.\n(remember, with the Timecode technology, a software has no clear way to know the difference between a disc turning faster because of the turntable's pitch being moved, or because of the disc being nudged or scratched. both result in the timecode signal coming faster.)checked: smooth the Pitch movements / unchecked: use only stable Pitch valuesAdjusts how much lead time is used on the vinyl before the start of the song. This is used so that VirtualDJ can track timecode movement before the actual start of the song.Use this button to save a .bmp file of your config. You can then upload this image on www.virtualdj.com forums if you need to ask for help to configure/optimize your timecode signal.スタートif paused, start the deck. if playing, restart from last stutter point.if paused, start the deck. if playing, pause the deck.if playing, pause the deck. if stopped, rewind to begining of the song, then cycle through all cue points each time pressed.if playing, pause and go to the last cue point. if paused, set the current position as cue point, and preview the cue as long as pressed. you can specify a number ('cue_stop 1', 'cue_stop 57') to work with several cues. number 0 or no number works on the last used cue.if playing, pause and go to the last cue point. if paused, set the current position as cue point, and preview the cue as long as pressed. if you kept pressed more than 2s (or the time specified), it will continue playing once you release. syntax: 'cue_play 1 1000ms'if playing, go to the last cue point and continue playing. if paused, set the current position as cue point, and preview the cue as long as pressed. if in loop, change loop_in to the cue point but keep the loop's length. you can specify a number ('cue 1', 'cue 57') to work with several cues. number 0 or no number works on the last used cue.if no cue point is set, set one at the current position. otherwise go to the cue point and start or continue playing. if in loop, set the cue point as new loop_in but keep loop_length. you can specify a number ('hot_cue 1', 'hot_cue 57') to work with several cues. number 0 or no number works on the last used cue.Select the nth cue point as default cue point for cue, hotcue, etc.. actionsstop to the last cue point, then on second press to the begining of the song, then cycle through the cue points.pause the deck.depending on the play_mode, act like play_stutter (Numark way) or play_pause (Pioneer way).depending on the play_mode, act like pause_stop (Numark way) or stop (Pioneer way).depending on the play_mode, act like cue_stop (Numark way) or cue (Pioneer way).move the crossfader. crossfader 0% will only let the left deck out, crossfader 100% will only let the right deck out.set the volume of the deck.set the pitch of the deck. used with a number, it gives the position on the slider (and therefore account for pitch_range). used with a percent it gives an absolute position. 'pitch 112%' set pitch at +12%, 'pitch 0.25' set pitch at -10% if pitch_range is 20.set the pitch of the deck, to be used by hardware controllers. if the pitch is changed by the software, the hardware slider will be unlinked from the real pitch until it reaches the actual pitch position again.set the pitch of the deck, to be used by hardware controllers if you prefere the change to be relative to the software pitch positionset the volume of the deck, but can be 'unlinked' from the actual volume if the slider position does not match the software volume positionset the volume of the deck, relative to the software volume positionmove the crossfader, but can be 'unlinked' from the actual crossfader if the slider position does not match the software crossfader positionmove the crossfader, relative to the software crossfader positionchange the gain, but can be 'unlinked' from the actual gain if the slider position does not match the software gain positionchange the gain, relative to the software gain positionused for a jogwheel without touch sensitivity. 'jogwheel +1.0' means a full rotation of the wheel.used for a jogwheel with touch sensitivity. 'touchwheel +1.0' means a full rotation of the wheel.use when the touchwheel is touched, to hold the song and start to scratch.synchronize the song with the other deck.synchronize the song with the other deck, using local beat information instead of the global beatgrid.play the song synchronized on the other deck.change the position in the song. 'goto +10ms' jumps 10ms forward. 'goto -4' jumps 4 beats backward. 'goto 20%' goes at 20% of the song's length.put the song on its nth beat after the downbeat without loosing sync: 'goto_bar 4'position in the song. (the difference between song_pos and goto is that song_pos can be used as a slider).set or remove a loop. 'loop 4', 'loop 0.5' set a loop in beats. 'loop 10ms' set a loop in ms. 'loop 200%' multiply by 2 the size of the loop. 'loop 50%' divides by 2. 'loop' alone set a loop at the actual position with the same beat size as the last set loop.if not in loop, set the begining of a loop. if in loop, jump back to the begining of the loop.if not in loop, set the deck in loop, starting from the last set loop_in point or stutter point. if in loop, exit the loop.change the length of the loop. 'loop_length 15ms' set the length in ms, 'loop_length 0.5' set the length in beats, 'loop_length +100%' set the length in percentage of the actual length.move the loop without changing its length. 'loop_move +10ms' set the distance in ms, 'loop_move +2' set the distance in beats, 'loop_move +50%' set the distance in percentage of the actual length.double the size of the loop.halve the size of the loop.remove the loop.set the loop size (or default loop size if no loop is active). If no parameter is provided, a popup list of loop values to choose from will be displayed.jump to the loop_in point.if in loop, remove the loop. otherwise, reactivate the last used loop.one-button smart loop: Set the loop in on the first press, set the loop out on second press, remove the loop on third press.store the current position in the cue. if one parameter is given, it's the number of the cue to use. if two parameters are given, the second is the position to store, in ms, in beats, or in percentage of the song length.jump to the specified cue.delete the cue. a cue number can be specified.change the name of the cue. if one parameter is given, it's the number of the cue to use. if two parameters are given, the second is the name to give to the cue. If no second parameter is given, a window will popup to ask for the name.automatically goes to the first beat in the song.set the trebble equalizer.set the medium equalizer.set the bass equalizer.mute the trebble.mute the medium.mute the bass.crossfade the trebble between both decks.crossfade the medium between both decks.crossfade the bass between both decks.reset the equalizer.set the gain, up to -30dB in the negative, and up to +7.5dB in the positive.set the gain, allowing up to +30dB in the positive.set the gain to match the other deck.set the gain in order to bring the song to the specified dBA (with 0dBA being the maximum level outputable by the soundcard without compression): 'set_gain 0'set the pitch to mathc the BPM of the other deck.change the key of the song, from -12 (one octave down) to +12 (one octave up), only in multiple of semitones.change the key of the song, from -12 (one octave down) to +12 (one octave up), allowing not only multiple of semitones.move the key up or down from the given amount of semitones.change the key of the song to match the given key. you can use standard notation ('set_key "A#m"') or numeric ('set key "03A"'). if no given key, it will use the other deck. the change will be the smallest change to make it compatible with the given key.change the key of the song to match the given key. you can use standard notation ('set_key "A#m"') or numeric ('set key "03A"'). if no given key, it will use the other deck. the change will match the exact key.slowly brings the pitch back to 0%. you can specify the speed in % per second (default 1% per second): 'pitch_reset 5%'set the range for the pitch slider. 'pitch 12%' set the range from -12% to +12%. 'pitch +1' scrolls through the defaut pitch ranges. 'pitch "12,16,25" +1' scrolls through the provided list of pitch ranges.slow down or speed up the song: 'pitch_bend +3%'. you can make the bend to increase slowly by specifying a second time parameter: 'pitch_bend +1% 500ms' will start at +1% and will double every 500ms.activate/deactivate the master tempo (to make the pitch slider change the speed of the song, but keep the original key of the song).activate/deactivate the key lock (to make the pitch slider change the speed of the song, but keep the key of the song like it is now).move into the song while the button is pressed. 'seek +2' moves beat by beat, skipping 2 beats every 10ms. 'seek +420ms' moves from 420ms every 10ms. using skip with a beat number keep the song playing correctly while moving inside.play the song backwardreverse the playback direction while dump is active, then when deactivated, start again forward from where the song should have been if it had been playing forward during the dump.minimize the application in the taskbar.maximize the application full screen, or back to normal.close the application.open the configuration window.change the page displayed in the browser window. 'page "browser"', 'page "sampler"', 'page "effects"', 'page "record"' set a specific page. 'page +1', 'page -1' scroll through the pages.change the left/right balance on the master output.change the volume of the master output.change the volume of the PFL output.change the gain of the PFL output (from -30dB to +30dB)change the mix of the PFL (0% is only the cued deck, 100% is the master output).change the PFL fader (0% is only the left deck, 100% is only the right deck).change the volume of the microphone.set the zoom level on the rhythm display. use 'zoom "near"', 'zoom "default"', 'zoom "far"' for the pre-set zoom levels, or use 'zoom 42%' to get to a precise zoom level.when smart_loop is activated, loop are automagically adjusted to sound perfect.when smart_play is activated, songs are automagically synchronized when played.when smart_cue is activated, songs are automatigically re-synchronized when jumped to a new position or cue.when smart_scratch is activated, backward scratching is automatically muted, only forward scratching will be heard.set the jogwheel in vinyl mode (with scratch), or in cd mode (with pitchbend). 1 is vinyl mode (default), 0 is cd mode.change the mode of the jogwheel between: "jog", "search", "loop_move", "loop_out", "loop_in", "browser", or use +1 and -1 to cycle through all modes. You can select from a subset using a syntax like 'wheel_mode "loop_move,loop_in,loop_out" +1'.set the mode for play/stop/cue buttons: 'play_mode "numark"', or 'play_mode "pioneer"'.set the mode to display time: "total", "remain", "elapsed", +1 or -1.set the auto_cue mode: "off", "on", "always".activate/deactivate the beatlock (to keep the songs always in sync, even while moving the pitch).lock the pitch sliders on both decks so both will move together.automatically crossfade to the other deck. You can specify the duration of the crossfade in ms: 'auto_crossfade 2000ms''scratch +120ms' to scratch 120ms forward.'scratch_hold on' or 'scratch_hold off' (or 'scratch_hold toggle') to stop the disc for scratching, or release it.'nudge +120ms' to nudge the song 120ms forward (using mastertempo if it's activated).active or unactive the action of the timecoded vinyl.bypass the timecoded input and play the vinyl directly through the soundoutput. all gain, RIAA and stereo correction are still applied. this mode works only if both the input and the output are on the same ASIO soundcard.set the timecode mode: "smart", "absolute", "relative".do nothing.return true.return false.turn on the LED.turn off the LED.syntax: 'var "my_var" ? my_action1 : my_action2'. execute my_action1 if my_var is true (non zero), execute my_action2 otherwise.syntax: 'var_equal "my_var" 42 ? my_action1 : my_action2'. execute my_action1 if my_var equals 42, execute my_action2 otherwise.syntax: 'var_not_equal "my_var" 42 ? my_action1 : my_action2'. execute my_action1 if my_var doesn't equal 42, execute my_action2 otherwise.syntax: 'var_smaller "my_var" 42 ? my_action1 : my_action2'. execute my_action1 if my_var is smaller than 42, execute my_action2 otherwise.syntax: 'var_greater "my_var" 42 ? my_action1 : my_action2'. execute my_action1 if my_var is greater than 42, execute my_action2 otherwise.syntax: 'set "my_var" 42'. set my_var to 42. if the variable name starts with '$', the variable is global (ie the same for all decks): 'set "$myglobalvar"'.syntax: 'toggle "my_var"'. toggle my_var between true and false.syntax: 'cycle "my_var" 42'. increment my_var, and goes back to 0 when it reaches 42. 'cycle "my_var" -42' decrements my_var, and goes to 41 after it reached 0.check if the value of the calling slider/encoder/button is equal to something.check if the value of the calling slider/encoder/button is greater than something: 'param_greater 0 ? sampler loop 200% : sampler loop 50%'check if the value of the calling slider/encoder/button is smaller than something: 'param_smaller 0 ? sampler loop 200% : sampler loop 50%'multiply the value of the calling slider/encoder/button by the given value: 'param_multiply 300% & effect slider'add the given value to the value of the calling slider/encoder/buttoninvert the value of the calling slider/encoder/button: 'param_invert & pitch_slider'wrap the value of the calling slider/encoder if more than the given valuetransform the value of the calling slider/encoder from a linear scale to a forth-and-back scalereturn true if the button calling this action is on the specified deck: 'action_deck 1 ? actionA : actionB'return true if a song is loaded on the deckexecute different actions depending if the key is pressed for a long time or not: 'holding ? automix : mix_now'. you can specify the time ('holding 1000ms'), by default it's 500ms.execute different actions depending if the key if pressed or released: 'up ? action1 : action2'execute different actions depending if the key if pressed or released: 'down ? action1 : action2'execute different actiosn depending if the key is being repeated or if it's the first message (only keyboard shortcuts are repeated while held down): 'isrepeat ? nothing : goto_cue')set the position of the video crossfaderlink or unlink the video crossfader to the audio crossfadermove the video crossfader automatically according to which side is playing, cueing, scratching, etc...launch a transition from one video deck to the other. you can specify the duration of the transition: 'video_transition 1000ms'select the plugin used for video transitions. you can specify by name ('video_transition_select "my_plugin"'), relative ('video_transition_select +1') or without parameters to open a popup window listing the available pluginsmove the n-th slider of the video transition pluginpush the n-th button of the video transition pluginactivate/deactivate the selected video effectselect a video effect plugin. you can specify by name ('video_fx_select "my_plugin"'), relative ('video_fx_select +1') or without parameters to open a popup window listing the available pluginsmove the n-th slider of the video effect pluginpush the n-th button of the video effect plugindeactivate all the active video effectsactivate/deactivate fade-to-black on volume sliderslink a new video to be used as image for the audio song currently on the specified deck. you can specify a filename ('videofile_link "my_video"'). if you don't give a parameter, the file currently selected in the browser is used. use 'videofile_link off' to remove the link.make the selected folder a favorite folder (monitored folders).create a new filter folder.create a new virtual folder (unmonitored folder).go back to the last browsed folder.scroll through the songs or folders.if focus is on songs, load the selected song. if focus is on folders, change focus to songs.if focus is on songs, change focus to folders. if focus is on folders, open or close the subfolders of the selected folder.change the active browser zone. 'browser_window "folders"', 'browser_window "songs"', 'browser_window "playlist"', 'browser_window "sidelist"', or 'browser_window +1'.put the keyboard focus on the search zone, or, if a text parameter is specified, search for this text.clear the search stringput the keyboard focus in the search zone but keep the actual search string.log the current search in the SearchLog.txt file, so you can easily search for your failed requests once the gig is over.start or stop the automatic playlist mixing.if automix is active, skip the actual song and mix to the next one in the playlist.display a drop-down with the list of options for the playlist.shuffle the order of the songs in the playlist.remove from the playlist all the songs that have already been played since the software was launched.repeat (or stop to repeat) the playlist while automixing.empty the playlist.save the playlist in a file.remove duplicate songs from the playlist.save the playlist in a virtual folder.add to the playlist the songs selected in the browser.load the first song in the playlist on the deck, but keep it in the playlist.load the first song in the playlist on the deck, and remove it from the playlist.exchange the content of the playlist and the sidelist.clear the sidelist.add to the sidelist the songs selected in the browser.load the first song from the sidelist.load the first song from the sidelist, and remove it from the sidelist.add to the specified virtualfolder the songs selected in the browser. 'virtualfolder_add "my_vfolder"'. if no folder name is given, add to the last one.load the selected song on the deck. you can also specify a fullpath to load 'load "path_to_my_song"'.open a window to edit many informations about the selected track.open a window to preview the selected track.open a window to edit the comment on the selected track.sort the browser files on the specified columne: 'browser_sort "smart"', 'browser_sort "author"', 'browser_sort "lastplay"', etc...'browser_gotofolder' goes to the folder containing the current file. 'browser_gotofolder "/my_path/my_folder"' goes to the specified folder. 'browser_gotofolder 4' goes to the fourth virtual/favorite folder.display the content of both the selected folder and all its subfolders in the browser list.popup the list of search options. to set one directly, you can use 'search_options "composer" toggle' etc...popup the list of view options. to set one directly, you can use 'view_options "showkaraoke" on' etc...'lock_pannel "folders"' or 'lock_pannel "playlist"'.tap on a few beats to set a new bpm for the song if the application didn't got it right on the first time.set the bpm of the song to the set value: 'set_bpm 129.3', or relative to the actual value: 'set_bpm 50%'.open a window with tools to fine-tune the bpm of the song.adjust the beat grid. 'adjust_cbg +2' moves the start bar from 4:4. 'adjust_cbg +10%' moves the actual bars.go to the specified mix point, from "StartTempo", "EndTempo", "StartCut", "EndCut", "StartFade", "EndFade".set the specified mix point to the actual pos, or to the specified pos.start recording the session.cut the current recording to a new file (or new track if recording to CD)open the record configuration pannelselect the curve of the crossfader. enter a value to adjust the slope from a X curve (0%) to a inverted-U curve (100%). you can also specify common curves by name ("smooth", "full", "scratch", "cut", "disabled"). or you can draw your own curve, using a syntax like 'crossfader_curve "0=[1,0]/0.5=[1,1]/1=[0,1]"'.invert the crossfader.show the specified plugin page: "Sound Effects", "Video Effects", "Video Transitions", "Others".unload the song from the deck.clone the deck (load the same song on the other deck, and play it from the same position, ready for beat-juggling).clone the deck (load the same song on the other deck, and play it from the same position, ready for beat-juggling), but do not match the pitch (for timecode turntable pitching).show or hide the nammed pannel from the skin: 'skin_pannel "my_pannel" on'.click on the named multibutton: 'multibutton "my_button"'.open the selection menu for the named multibutton. if a second text parameter is provided after the name, use it as the new action to load in the multibutton: 'multibutton_select "my_button" "goto_cue 2 & play"'.Smoothly crossfade from one side to the other, using beatsync if both songs have enough beat.Smoothly crossfade from one side to the other.if the non-playing deck has a song loaded that's already been played, load a new one from the playlist. then, smoothly crossfade from the playing deck to the other, using beatsync if both songs have enough beat.if the non-playing deck has a song loaded that's already been played, load a new one from the sidelist. then, smoothly crossfade from the playing deck to the other, using beatsync if both songs have enough beat.enable or disable automix using both decks (deprecated).enable or disable the decks to automatically start playing when the opposite deck reached its endenable or disable fader startalternatively jumps one beat forward and backwardinvert the deck of the controllers.rescan for newly connected controllers.refresh the display of the specified controller (or all if none specified).reinit the specified controller (or all if none specified), going through the exit and init sequences (you can specify a delay between exit and init: 'reinit_controllers "mycontroller" 200ms'.defines a button whose behaviour can be changed by a menu. Syntax: 'menu_button 1 "hotcue,sampler,effect,loop"'.display the text provided for a limited time (default 3 seconds). '$myvar$' in the text are replaced by the value of myvar. '$?myvar$' are replaced by 'on' or 'off'. '|' goes to new line. syntax: 'show_text "Shift:|Value=$?shift$" 5000ms'get the remaining time in %. if used with a parameter (in % or ms), returns true if the time left is less or equal than the value: 'songpos_remain 500ms blink'.because no DJ should work on an empty stomachshow/hide the lights control windowset the color programset the chase programblack all lightsactivate/deactivate the strobeflash all lightsSet an individual dmx value. first parameter is channel, second is valueplay the selected sample. syntax 'sampler play' plays the default sample. 'sampler 4 play' plays the fourth sampler slot.play the selected sample. if already playing, restart from begining.play the selected sample if it's not already playing, or stop it if it's already playing.stop the selected sample. syntax 'sampler stop' stops the default sample. 'sampler 4 stop' stops the fourth sampler slot. 'sampler all stop' stops all samples.change the volume of the selected sample.on first press, start to record a new sample in the selected slot. on second press, stop to record.start to record a new sample in the selected slot.stop to record the new sample.abort the recording of the sample.put the sample in loop, or change the size of the loop: 'sampler default loop on' or 'sampler default loop 50%'.lock or unlock the pitch of the sample on the current song.lock or unlock the phase of the sample on the current song.popup the sample menu.select which sample is the default sampler slot for that deck. syntax 'sampler select 5' selects the fifth sampler slot. 'sampler select +1' scrolls through the sampler slots. 'sampler select' open a popup menu to select the new default sampler slot.load a new sample in the selected slot. 'sampler load "my_sample.vds"' loads a specified file. 'sampler load' open a selection window.save the current sample in a file. 'sampler save "my_sample.vds"' saves in a specified file. 'sampler_save' open a selection window.get the current position of the samplestart or stop the effect. you can also specify an effect by name ('effect "my_effect" active on'), or use a different effect slot ('effect 3 active').select a new effect. you can specify the effect by name ('effect select "my_effect"'), or relative to the current effect ('effect select +1'). with no parameters ('effect select'), it will open a popup under the mouse with the list of available effects. you can also specify a different effect slot ('effect 4 select "my_effect"').move the n-th slider on the given effectpush the n-th button on the given effectget the minutes of the elapsed time (or remaining or total, depending on "display_time"). use 'get time_min "absolute"' if you don't want to take the pitch variations in account. you can write 'get time_min "elapsed"' or "remain" or "total" to bypass the setting of display_timeget the seconds of the elapsed time (or remaining or total, depending on "display_time").get the miliseconds of the elapsed time (or remaining or total, depending on "display_time").get the minutes of the length of the song (this is equivalent to 'get time_min "total"').get the seconds of the length of the song.get the miliseconds of the length of the song.get the pitch from -100% to +100%, centered on 0%get the pitch from 0% to 200%, centered on 100%is true if the pitch is zero, with an optional precision parameter: "get pitch_zero 0.1%"get the bpm of the song.get the intensity of the beat at the current position (0% to 100%).get the intensity of the beats from both decks at the same time.get some text to display. depending on the latest action, it can be the name of an effect, the folder being browsed, the title of the current song, etc... for multiline text, you can add the line number: "get text 1", "get text 2".get the value of the incoming vu-meter. don't specify a deck if you want the master mix vu-meter.get the value of the incoming vu-meter for the left balance.get the value of the incoming vu-meter for the right balance.get the value of the outgoing vu-meter. don't specify a deck if you want the master output vu-meter.get the value of the outgoing vu-meter for the left balance.get the value of the outgoing vu-meter for the right balance.get the angle of the discget the position of the turntable armget the position in the songget the CPU usageget the position of the automix crossfaderget the volume applied by both the volume sliders and the crossfaderget the timecode qualityget the number of the deck.get the numeric value of the specified variableget the text provided: 'get custom_text "hello"'get the number of beats in the current loopget the number of beats in the current loop or the default loop size if no loop is activeget the number of the last used cueget the number of semitone up or down currently applied to the songget the number of the current beat in the 4:4 bar. 'get beat_num' returns the beat number from 1 to 4. 'get beat_num 2' return true if the song is on a second beat. 'get beat_num 2 16' returns true if the song is on the second beat of a 4:16 bar.get the position in % in the 4:4 bar (or in 4:16 if called with 'get beat_bar 16')get the filepath of the song on the deckget the filename of the song on the deckget the filesize of the song on the deckget the artist of the song on the deckget the title of the song on the deckget the artist and title of the song on the deck, separated by a '-'get the title and artist of the song on the deck, separated by a '-'get the album of the song on the deckget the genre of the song on the deckget the composer of the song on the deckget the length in seconds of the song on the deckget the comment of the song on the deckget the version of VirtualDJ (in text)get the version of VirtualDJ (in numeric)return the Windows handle to VirtualDJ's windowreturn the home folder of VirtualDJ.get the artist of the selected song in the browserget the title of the selected song in the browserget the artist and title of the selected song in the browser, separated by a '-'get the title and artist of the selected song in the browser, separated by a '-'get the album of the selected song in the browserget the composer of the selected song in the browserget the genre of the selected song in the browserget the comment of the selected song in the browserget the filepath of the selected song in the browserget the bpm of the selected song in the browserget the key of the selected song in the browserget the number of the sampler slot selected on this deckreturn the given constant: 'get constant 75%' always returns 75%get the number of active sampler slotsget the number of active effect pluginsget the name of the currently selected effectget the name of the currently selected sampleget the name of the currently selected video effectget the name of the currently selected video transitionお気に入り登録new virtual (unmonitored) folder登録new filter (automatic) folder登録Automix＆プレイリスト設定オートミックスの有効/無効Log this search in the SearchLog.txt fileTap to modify the BPM (right-click for advanced edit